Si vous voulez se prouver une compétition et s'enraciner le statut dans l'industrie IT à travers de test Certification EMC E22-275, c'est obligatoire que vous devez avior les connaissances professionnelles. Mais il demande pas mal de travaux à passer le test Certification EMC E22-275. Peut-être d'obtenir le Certificat EMC E22-275 peut promouvoir le tremplin vers l'Industrie IT, mais vous n'avez pas besoin de travailler autant dur à préparer le test. Vous avez un autre choix à faire toutes les choses plus facile : prendre le produit de Pass4Test comme vos matériaux avec qui vous vous pratiquez avant le test réel. La Q&A de Pass4Test est recherchée particulièrement pour le test IT.
Dans cette société de plus en plus intense, nous vous proposons à choisir une façon de se former plus efficace : moins de temps et d'argent dépensé. Pass4Test peut vous offrir une bonne solution avec une plus grande space à développer.
Aujoud'hui, c'est une société de l'informatique. Beaucoup d'organisations peut provider l'outil de se former pour le test Certification EMC E22-275. Mais on doit admettre que ces site n'ont pas la capacité à offrir une bonne Q&A, elles sont généralement très vagues et sans les points. C'est loin d'attirer les attentions des candidats.
Dans cette société, il y a plein de gens talentueux, surtout les professionnels de l'informatique. Beaucoup de gens IT se battent dans ce domaine pour améliorer l'état de la carrière. Le test E22-275 est lequel très important dans les tests de Certification EMC. Pour être qualifié de EMC, on doit obtenir le passport de test EMC E22-275.
Si vous voulez ne se soucier plus à passer le test EMC E22-275, donc vous devez prendre la Q&A de Pass4Test comme le guide d'étude pendant la préparation de test EMC E22-275. C'est une bonne affaire parce que un petit invertissement peut vous rendre beaucoup. Utiliser la Q&A EMC E22-275 offerte par Pass4Test peut vous assurer à réussir le test 100%. Pass4Test a toujours une bonne réputation dans l'Industrie IT.
Code d'Examen: E22-275
Nom d'Examen: EMC (recoverpoint backup and recovery specialist exam )
Questions et réponses: 126 Q&As
Choisissez le Pass4Test, choisissez le succès. Le produit offert par Pass4Test vous permet à réussir le test EMC E22-275. C'est necessaire de prendre un test simulation avant participer le test réel. C'est une façon bien effective. Choisir Pass4Test vous permet à réussir 100% le test.
L'importance de la position de Certificat EMC E22-275 dans l'industrie IT est bien claire pour tout le monde, mais c'est pas facile à obtenir ce Certificat. Il y a beaucoup de Q&As qui manquent une haute précision des réponses. Cependant, Pass4Test peut offrir des matériaux pratiques pour toutes les personnes à participer l'examen de Certification, et il peut aussi offrir à tout moment toutes les informations que vous auriez besoin à réussir l'examen EMC E22-275 par votre première fois.
E22-275 Démo gratuit à télécharger: http://www.pass4test.fr/E22-275.html
NO.1 Which generation of RecoverPoint Appliance hardware must be used to ensure you can use a CRR
over FC configuration?
A. Gen2 and 3 only
B. Gen2 and 4 only
C. Gen2, 3, and 4
D. Gen3 and 4 only
Answer: D
EMC E22-275 examen E22-275 examen
NO.2 In a Brocade splitter implementation using frame redirect mode, how many DPCs are available?
A. 1
B. 2
C. 3
D. 4
Answer: B
EMC E22-275 examen certification E22-275 E22-275 examen
NO.3 When installing a Microsoft Windows kdriver splitter, you receive the dialog box shown in the exhibit
and the installation stops.
What must you do to recover the installation?
A. Click Next, correct the SAN issue, and run SAN Diagnostics again
B. Click Next and Accept the SAN issue warning to continue the installation
C. Click Next to resume the installation with flags
D. Click Back to reconfigure the kdriver parameters
Answer: A
EMC certification E22-275 E22-275 examen E22-275 certification E22-275
NO.4 You have installed the Solaris kdriver on a host. When validating the installation, you find that the
splitter is not seen by the RecoverPoint Management Application. Other splitters appear correctly in the
GUI.
Which step should you take on the host to discover the splitter by the GUI?
A. Run the /etc/init.d/kdrv start command
B. Run the rc.kdrv configure command and restart the kdriver
C. Run the rc.kdrv start command and reboot the host
D. Run the devfsadm command
Answer: A
EMC E22-275 examen E22-275 examen E22-275
NO.5 Refer to the Exhibit.
You are troubleshooting a RecoverPoint issue where consistency groups, using a kdriver splitter, have
stopped working. While analyzing the problem, you ran detect Fibre Channel targets from the SAN
Diagnostics menu. What does this output tell you that relates to the problem in the environment?
A. RPA is not zoned to any hosts
B. All RPA HBA ports are being used as targets
C. Even and odd ports should not see the same targets
D. Ports 0 and 3 should not be connected to the same fabric
Answer: A
EMC examen E22-275 examen E22-275
NO.6 Refer to the Exhibit.
You are troubleshooting High Load activities on two consistency groups (CGs). As part of your tasks, you
have run the data collect and are reviewing the system log files for the CGs.
What is a possible root cause for this High Load period?
A. The preferred RPA has lost communications with the remote RPA and caused a failover of the CG
within the cluster.
B. The local site has lost connectivity to the remote site and caused the CG to go into Marking mode.
C. There is no journal assigned to the CG in the local site, causing latency build up during data transfer.
D. The copies are cross-connected between the sites causing additional I/O to flood the connectivity
between the sites.
Answer: A
EMC examen E22-275 E22-275 examen
NO.7 You want to upgrade a RecoverPoint environment using Deployment Manager (DM). As a prerequisite
to continuing with the upgrade, which TCP port needs to be open between the management station where
the DM is installed and the RPA management IP addresses?
A. 22
B. 23
C. 80
D. 161
Answer: A
EMC examen E22-275 certification E22-275 certification E22-275
NO.8 You are implementing a RecoverPoint CRR solution. The RPAs that were delivered do not have the
correct version of RecoverPoint.
What is the EMC-preferred way to load the correct software version to the RPAs?
A. Before launching Deployment Manager
B. During the Deployment Manager installation process
C. After completing the installation but before the license is installed
D. After the installation is complete
Answer: A
certification EMC E22-275 E22-275
NO.9 You are selecting the RecoverPoint repository volume using Deployment Manager at a customer's site.
If the customer's environment makes use of an EMC VNX array, what needs to be considered?
A. Selected LUN will be formatted
B. Use of a thin provisioned LUN is supported
C. LUN is accessible by only one RPA
D. Thin LUNs have to be pre-allocated
Answer: A
EMC E22-275 E22-275 certification E22-275
NO.10 A customer is planning to deploy a 2-node RecoverPoint cluster at each data center. They will make use
of dual stack for its LAN network connection.
How many IP addresses should the customer plan for per site, including management IP addresses.?
A. 5
B. 6
C. 7
D. 8
Answer: D
certification EMC certification E22-275 E22-275 examen
NO.11 What is the blade processor in a Brocade splitter?
A. A separate command shell which loads and operates the splitter
B. A special slot in a Brocade director with intelligent switch capabilities
C. A daughterboard in the switch to allow RecoverPoint integration
D. A dedicated memory space in the RPA to integrate with a Brocade switch
Answer: A
certification EMC certification E22-275 certification E22-275
NO.12 You have a customer with an EMC VNX array at each site that uses both block and file storage. They
would like to use the VNX splitter to replicate all their iSCSI data LUNs.
How would you configure RecoverPoint?
A. Use the Consistency Group Wizard to create a CG
B. Use Installation Manager and "Expose" all iSCSI LUNs
C. Check the "Enable iSCSI Replication" option in the CG profile
D. Replication of iSCSI LUNs are not supported at this time
Answer: A
EMC examen certification E22-275 E22-275
NO.13 A customer wants to add a new RecoverPoint UserID. Which role must their UserID belong to in order to
manage user settings?
A. Security
B. Admin
C. Boxmgmt
D. Monitor
Answer: A
EMC E22-275 E22-275 E22-275 E22-275
NO.14 You are installing the RecoverPoint splitter agent on a B-Series switch. After downloading the agent
binary file to the blade processor, which step must be completed prior to successfully running the
command?
A. chmod +x agent_binary_file
B. chmod +rw agent_binary_file
C. /thirdparty/recoverpoint/install/zoning_script.sh
D. /thirdparty/recoverpoint/install/kdrv start
Answer: A
EMC examen E22-275 examen E22-275 examen
NO.15 You are finalizing a RecoverPoint setup that makes use of the Symmetrix VMAXe splitter. You are about
to create the masking view for the RecoverPoint cluster initiator group.
Which setting must be enabled to allow the RPAs to write to the replica volumes when image access is
disabled?
A. Write Protect Bypass
B. Always Push Old
C. Backlog Mirroring
D. Device Tagging
Answer: A
EMC examen E22-275 E22-275 E22-275
NO.16 You have finished deploying SANTap in a RecoverPoint CRR environment. At Site 2 everything looks
fine. However, at Site 1 you see the following message on the RecoverPoint Management Application:
WARNING: RPA cannot access discovery AVT: 7001248288220000 ; Site1 ; RPA1 in Site1 ; Cisco -
CVT22-2109000dec3c3182
You have checked that back-end and front-end VSANs are properly configured with the correct members
in each. Which action can you take to perform a full discovery of ITLs and recreation of AVTs to fix this
issue?
A. SSH as 'admin' and run the refresh_santap_view command
B. Refresh the splitters on the RecoverPoint Management Application
C. Rescan the SAN on the RecoverPoint Management Application
D. SSH as 'admin' and run the get_santap_view command
Answer: A
EMC examen certification E22-275 E22-275 examen E22-275 certification E22-275 certification E22-275
NO.17 A customer has a RecoverPoint environment defined with two RPAs at each site. They created two
consistency groups (CGs), each one in a different RPA. Their business requires that both consistency
groups act as a single unit as they are dependent on one another.
How can they achieve this requirement?
A. Create one Group Set for both CGs
B. Enable the RecoverPoint Snapshot Consolidation feature
C. Select the same primary RPA for both CGs
D. Configure distributed consistency groups
Answer: A
certification EMC E22-275 E22-275 certification E22-275
NO.18 Which device allows the installation of a Brocade splitter into a DCX director?
A. PB-48k-18i
B. PB-48k-AP
C. PB-DCX-32P-E
D. PB-DCX-48P-8G
Answer: B
EMC examen E22-275 certification E22-275
NO.19 You have just enabled the zones and re-enabled the configuration on a AP-7600B switch. Where would
you run the thirdparty/recoverpoint/install/kdrv status command to verify the status of the kdriver on the
switch?
A. As root in the blade processor
B. As admin in the blade processor
C. As root in the control processor
D. As admin in the control processor
Answer: A
EMC E22-275 examen certification E22-275
NO.20 In a cascaded RecoverPoint configuration, a customer experiences a site failure at the secondary site.
What impact does this have on replication?
A.Site 1 to Site 2 replication fails Site 2 to Site 3 replication fails
B.Site 1 to Site 2 replication fails Site 2 to Site 3 replication continues
C.Site 1 to Site 2 replication fails Site 1 to Site 3 replication continues
D.Site 2 to Site 3 replication fails Site 1 to Site 3 replication continues
Answer: A
EMC certification E22-275 E22-275 E22-275
C'est un bon choix si vous prendre l'outil de formation de Pass4Test. Vous pouvez télécharger tout d'abord le démo gratuit pour prendre un essai. Vous aurez plus confiances sur Pass4Test après l'essai de notre démo. Si malheureusement, vous ne passe pas le test, votre argent sera tout rendu.
没有评论:
发表评论